Checking The Needle; Cleaning The Length Feed Plate - Brother HE-800A Instruction Manual

9. CLEANING AND MAINTENANCE
９-５. Checking the needle
９-６. Cleaning the length feed plate
71
Always check that the tip of the needle is not broken
and also the needle is not bent before starting sewing.
2163Q
Clean the length feed plate (1) if foreign materials such
as shavings start getting onto the material.
1. Loosen the two bolts (2), and then remove the
length feed plate (1).
2. Clean the underside of the length feed plate (1) and
the needle plate (3).
3971Q
HE-800A