Installing The Power Switch; Installing The Bed Base - Brother HE-800A Instruction Manual

４-５. Installing the power switch
４-６. Installing the bed base
1. Place the bed base (1) on top of the work table, and insert the four collars (2).
2. Provisionally tighten the four flange nuts (4) onto the four bolts (3), and then position the bed base (1).
3. Install the bed base (1) with the three flat washers (5) and wood screws (6), and then install the two rubber caps (7).
4. Remove the four bolts (3).
1. Install the power switch (1) with the two screws (2).
2. Secure the power switch (1) cord and the motor (4)
cord with the six staples (3).
3859Q
HE-800A
4. INSTALLATION
3860Q
10