Installing The Machine Head; Installing The Head Rest - Brother HE-800A Instruction Manual

4. INSTALLATION
４-７. Installing the machine head
４-８. Installing the head rest
11
3861Q
1. Place the two bed hinges (1) so that they are level
as shown in the illustration at left, and then place the
machine head gently on top of the bed base (3) so
that the cables (2) do not get clamped.
Note:
The bed base (3) is made from plastic, so be
careful not to hit it with the machine head when
placing the machine head on top of it.
2. Install the machine head with the four spring
washers (4) and four bolts (5).
Note:
Make sure that the felt support (6) do not touch the
bed base (3).
3862Q
Tap the head rest (1) into the table hole.
Note:
Tap the head rest securely into the table hole.
If the head rest is not pushed in as far as it will go,
the machine head will not be sufficiently stable when
it is tilted back.
2778Q
HE-800A