Before You Begin; Power Cord And Foot Controller; Power Switch; Thread Tension Dial - Brother PQ1500SL Operation Manual

Before You Begin (1)

Power Cord and Foot Controller

Note
Please use common household
current.
● Plug in cord.
● Plug foot controller into machine.
Note
Foot controller: Model P
This foot controller is used for sewing
machine model PQ1500S.

Power Switch

● Flip power switch to "I" position to
turn on.
● To switch power off, flip switch to
"O" position.

Thread Tension Dial

● When tighter thread tension is
desired, turn the tension dial to
the right. Upper and bobbin
threads will meet on right side of
the fabric.
● When looser thread tension is de-
sired, turn tension dial to the left.
Upper and lower threads will then
meet on wrong side of fabric.
Power Cord
Foot Controller
Power Switch
Upper Thread Tension
Loosen Tighten
Tension Block

Hand Wheel

● Position needle using hand
wheel.
✽ Always turn hand wheel towards
you.

Stitch Length Regulator

● Adjust desired stitch length using
stitch regulator dial.

Reverse Stitch Lever

● Sewing in reverse is possible
when the reverse stitch lever is in
the lowered position.
✽ Make sure to push the lever all
the way down when reverse sew-
ing is desired.
✽ When the feed adjustment dial is
set between 5-7mm, the reverse
stitch length is always 5 mm.
Hand Wheel
Stitch Length
Reference Mark
1
Lower number
= shorter stitches
Higher number
= longer stitches
Stitch Length Regulator
Reverse Stitch
Lever
3