Removing A Memory Module - Epson Aculaser M2000 series User Manual

Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See
"Making Optional Settings" on page 113.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete the printer using Print Setup
Utility (for Mac OS X 10.3 and 10.4), Print Center (for Mac OS X 10.2), and then re-register the printer.

Removing a memory module

Warning:
w
Be careful when working inside the printer as some components are sharp and may cause injury.
Caution:
c
Before you remove a memory module, be sure to discharge any static electricity by touching a grounded
piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
Installing Options 63