Connecting The Unit With A Casio Label Printer - Casio FX-9750G Quick Start Manual

20-3 Connecting the Unit with a CASIO Label
Printer
After you connect the unit to a CASIO Label Printer with an optional SB-62 cable,
you can use the Label Printer to print screen shot data from the unit. See the User's
Manual that comes with your Label Printer for details on how to perform this opera-
tion.
u u u u u To connect the unit with a Label Printer
1. Check to make sure that the power of the unit and the Label Printer is off.
2. Connect the optional SB-62 cable to the Label Printer.
3. Remove the cover from the connector of the unit.
4. Connect the other end of the SB-62 cable to the unit.
5. Switch on the power of the unit, followed by the Label Printer.
• The operation described above can be performed using the following Label Printer
models: KL-2000, KL-2700, KL-8200 (as of October 1996).
• Be sure you keep the connector cover in a safe place so you can replace it after
you finish your data communications.
fx-9750G
• After you finish data communications, switch off power in the sequence: the unit
first, and then the Label Printer. Finally, disconnect the equipment.
Label Printer
SB-62 cable
366