Casio FX-9750G Quick Start Manual page 389

The following shows what the displays of the sending and receiving units look like
after the data communication operation is complete.
Sending Unit
Press A to return to the data communication main menu.
u u u u u To send backup data
This operation allows you to send all memory contents, including mode settings.
While the send data type selection menu is on the screen, press 6 (BACK), and
the back up send menu shown below appears.
6(BACK)
Press 6 (TRAN) to start the send operation.
6(TRAN)
The following shows what the displays of the sending and receiving units look like
after the data communication operation is complete.
Sending Unit
Press A to return to the data communication main menu.
• Data can become corrupted, necessitating a RESET of the receiving unit, should
the connecting cable become disconnected during data transfer. Make sure
that the cable is securely connected to both units before performing any data
communication operation.
Performing a Data Transfer Operation
20 - 5
Receiving Unit
1 2 3 4 5
Receiving Unit
6
371