Converting; Y -Axis Values To Integers (Intg) - Casio FX-9750G Quick Start Manual

• You can use RND with any type of graph.
• You cannot use RND inside a program.
• You can use RND with a graph produced by a multi-statement connected by ":",
even if the multi-statement includes non-graph operations.
• When RND is used in a statement that uses a display result command (^) to
draw a graph, Rounding Coordinate parameters are applied up to the display
result command, but any graphs drawn after the display result command are
drawn according to normal graph overwrite rules.
k k k k k Converting
- and
x
This feature converts View Window values to the following, and redraws the graph
with the current pointer position as the center point.
Xmin
Xmax = center point +63.5
Xscale = 10
Example To graph
Use the following View Window parameters.
Xmin
Xmax = 5
Xscale = 1
1. Press 2 (Zoom) 6 (g) after drawing the graph.
2(Zoom)6(g)
2. Press 4 (INTG).
4(INTG)
Other Graphing Functions
-axis Values to Integers (INTG)
y
= center point –63.5
y x
= 2 – 3 and then redraw it using INTG
= –5 Ymin
Ymax = 10
Yscale =
Ymin = center point –31.5
Ymax = center point +31.5
Yscale = 10
= –10
2
1 2 3 4
8 - 6
5 6
157