Casio FX-9750G Quick Start Manual page 259

15 - 2
Storing a Function and Generating a Numeric Table
u u u u u To generate a table using a list
Example
• If the highlighting is not located at the Variable item, use f and c to move it
After specifying the list you want to use, press J to return to the previous screen.
• Note that the RANG item for function key 5 of the TABLE Menu function list
k k k k k Generating a Table
Example
Use f and c to move the highlighting to the function you want to select for table
generation and press 1 (SEL) to select it.
The "=" sign of selected functions are highlighted on the screen. To deselect a func-
tion, move the cursor to it and press 1 (SEL) again.
Press 6 (TABL) or w to generate a numeric table using the functions you se-
lected. The value of variable
list you specified.
To generate a table using the values in List 6
!Z
there.
2(LIST)6(List6)
does not appear when a list name is specified for the Variable item of the set up
screen.
To generate a table of values for the functions stored in
memory areas Y1 and Y3 of the TABLE Mode function list
x
changes according to the range or the contents of the
1 2 3 4 5 6
1 2 3 4 5 6
238