Casio FX-9750G Quick Start Manual page 360

Example: Lbl 1:? # A _
If A > 0 And A < 10 _
Then "GOOD"_
Else Goto 1_
IfEnd
The above program displays the message "GOOD" whenever a value that is greater
than zero and less than 10 is input. Any other value prompts for input again.
For~To~Next
Function: This command repeats everything between the For-statement and the
Next-statement. The starting value is assigned to the control variable with the first
execution, and the value of the control variable is incremented by one with each
execution. Execution continues until the value of the control variable exceeds the
ending value.
Syntax:
For <starting value> # <control variable name> To <ending value>
_
<statement> :
^
Parameters:
• control variable name: A to Z
• starting value: value or expression that produces a value (i.e. sin
• ending value: value or expression that produces a value (i.e. sin
Description:
1. When the starting value of the control variable is greater than the ending value,
execution continues from the statement following Next, without executing the
statements between For and Next.
2. A For-statement must always have a corresponding Next-statement, and the Next-
statement must always come after its corresponding For-statement.
3. The Next-statement defines the end of the loop created by For~Next, and so it
must always be included. Failure to do so results in an error (Go ERROR).
Example: For 1 # A To 10_
A " 3 # B_
B ^
Next
For~To~Step~Next
Function: This command repeats everything between the For-statement and the
Next-statement. The starting value is assigned to the control variable with the first
execution, and the value of the control variable is changed according to the step
value with each execution. Execution continues until the value of the control variable
exceeds the ending value.
Command Reference
Next
19 - 11
_
:
^
x
, A, etc.)
x
, A, etc.)
341