Casio FX-9750G Quick Start Manual page 213

e ~ ef ~ f
aY!=v
(v+c)(v-c)
u u u u u To insert text in the RUN or PRGM Mode
The following is the syntax for inserting text in these modes.
Text <line number>, <column number>, "<text>"
• The line number can be specified within the range of 1 to 63, while the column
number can be specified in the range of 1 to 127.
• The following are the characters that can be used inside of comment text in the
STAT, GRAPH, TABLE, RECUR, or CONICS Mode.
r
, ! , space, 0~9, ., +, –, ", ÷, (–), EXP, #, Ans, {, (, ), [, ], {, }, comma, $,
A~Z,
^
x
, log, In, ,
• A newline operation cannot be performed when inserting comment text. To
input multiple lines, you have to perform the above comment text insert opera-
tions more than once.
k k k k k Turning Pixels On and Off
The following procedure lets you turn each individual screen pixel on and off. You
can specify any pixel from the upper left-hand corner (1, 1) to the lower right-hand
corner (63, 127) of the screen.
Line range: 1 to 63
Column range: 1 to 127
• Note that you can turn pixels on and off only in the RUN and PRGM Modes.
When turning pixels on and off, first display the sketch menu and then press 6 (g)
6 (g) 3 (PIXL) to display the pixel menu.
6(g)6(g)3(PIXL)
1 (On) .......... Turn specified pixel on
2 (Off) .......... Turn specified pixel off
3 (Chg) ........ Switch status of specified pixel
Graphing with the Sketch Function
x e x x
, 10 , , 3 , –1 , sin, cos, tan, sin
10 - 2
–1 , cos –1 , tan –1
1 2 3 4 5 6
x
2 ,
187