Casio FX-9750G Quick Start Manual page 206

10 - 2
Graphing with the Sketch Function
u u u u u To plot points in the RUN or PRGM Mode
The following is the syntax for plotting points in these modes.
Plot <
Example
1. After entering the RUN Mode, display the sketch menu and perform the following
2. Press w and the pointer appears on the display. Press w again to plot a point.
• You can use the cursor keys (f, c, d, e) to move the pointer around the
x y
-coordinate>, <
To plot a point at (2, 2)
Use the following View Window parameters.
Xmin = –5
Xmax = 5
Xscale = 1
operation.
!4(Sketch)6(g)
1(PLOT)1(Plot)c,c
ww
screen.
• If you do not specify coordinates, the pointer is located in the center of the
graph screen when it appears on the display.
• If the coordinates you specify are outside the range of the View Window param-
eters, the pointer will not be on the graph screen when it appears on the dis-
play.
x y
• The current - and
and Y.
-coordinate>
Ymin
Ymax = 10
Yscale =
-coordinate values are assigned respectively to variables X
= –10
2
1 2 3 4 5 6
180