Searching For Data Inside A Program - Casio FX-9750G Quick Start Manual

19-7 Searching for Data Inside a Program

1. Recall the program, press 3 (SRC), and input the data you want to search for.
2. Press w to begin the search. The contents of the program appears on the screen
3. Press w to find the next instance of the data.
Example To search for the letter "A" inside the program named OCTA
3(SRC)
aA
• You cannot specify the newline symbol (_) or display command (^) for the search
data.
with the cursor located at the first instance of the data you specified.
w
• If there is no match inside the program for the data you specified, the contents of
the program appear with the cursor located at the point from which you started
your search.
• Once the contents of the program are on the screen, you can use the cursor keys
(f, c, d, e) to move the cursor to another location before searching for
the next instance of the data. Only the part of the program starting from the
current cursor location is searched when you press w.
• Once the search finds an instance of your data, inputting characters or moving
the cursor causes the search operation to be cancelled (clearing the Search indi-
cator from the display).
• If you make a mistake while inputting characters to search for, press A to clear
your input and re-input from the beginning.
1 2 3
Indicates search operation is in progress
4 5 6
327