Installing The Printer Driver In Windows - Epson Stylus Color 900N User Manual

13. Follow steps 2 through 10, using the same settings you used in those steps.
14. When the Setup Complete screen appears, select
15. After you restart your computer, right-click the green background monitoring
icon
This turns off background monitoring, which may interfere with EPSON Net!2
when you configure the card. (See page 95 in your electronic EPSON Stylus
COLOR 900N Manual or Chapter 11 in your Administrator's Manual to turn on
background monitoring.)

Installing the Printer Driver in Windows

Follow these steps to install your printer driver:
1. Insert diskette 1 in your drive.
2. In Windows 98, Windows 95, or Windows NT 4.0, click
In Windows 3.1x, select
3. Type
A :\Setup
4. Click
OK
Your printer is automatically set to your local port, LPT1. You need to change it
to follow the network path to your printer by adding a port as described on
pages 51 and 52.
110
in your Startup group on the taskbar. Click
If you install Status Monitor 2 on additional workstations, or
you are not using EPSON Net!2, you do not have to turn off
background monitoring. You should limit the number of
systems that monitor the printer, however, to prevent
network traffic problems.
from the
Run
(where is your diskette drive letter).
A :
and follow the instructions on the screen to install your printer driver.
For basic instructions on using your printer driver, see
page 59.
and click
Yes
Stop monitoring now
Start
menu in Program Manager.
File
.
Finish
.
, then click .
Run