Uninstalling Epson Status Monitor 2 - Epson Stylus Color 900N User Manual

Macintosh
1. Insert the EPSON printer software CD-ROM in your drive.
2. Double-click the
3. Click the arrow in the list at the top showing Easy Install, and select
from the list.
4. Click the
Remove
5. Follow the instructions on the screen to uninstall the printer software.
To reinstall your software, see page 49.

Uninstalling EPSON Status Monitor 2

Follow the steps below to uninstall EPSON Status Monitor 2. If you are using
Windows NT, you need to log on as the Administrator.
If EPSON TCP/IP printing is enabled, disable it as described in
"Changing the Status Monitor 2 Setup" on page 103 in your
electronic EPSON Stylus COLOR 900N Manual .
If you try to uninstall EPSON Status Monitor 2 when using
IntranetWare Client for NT in Windows NT 4.0, and an error
message appears and the uninstall process terminates, delete
the following files from the directory where EPSON Status
Monitor 2 is installed, and then delete EPSON Status Monitor
2. (Deleting these files will not cause errors in Novell
IntranetWare Client for NT.)
Files: NETWIN16.DLL, CLNWIN16.DLL, LOCWIN16.DLL,
NCPWIN16.DLL, NWIPXSPX.DLL, CLXWIN16.DLL,
CALWIN16.DLL
1. Click , point to
Start
2. Double-click
Add/Remove Programs
3. Click
EPSON Status Monitor 2
4. Follow the instructions on the screen.
icon. Then click
Installer
button on the bottom of the screen.
, and then click
Settings
and click the
.
Continue
Control Panel
.
Add/Remove
Remove
.
button.
99