Installing In Windows 3.1X - Epson Stylus Color 900N User Manual

Changing Your Port Setting
Follow the steps below to change the port setting. In Windows NT 4.0, make sure the
TCP/IP Print Server service is running before you start.
, point to
1. Click
Start
2. Right-click the
EPSON Stylus COLOR 900N
3. Select
Properties
4. In Windows 98 or Windows 95, click the
In Windows NT 4.0, click the
5. Click .
Add Port
6. In Windows 98 or Windows 95, click
EPSON_TCPIP_Printer that your printer is set up on. Then click
In Windows NT 4.0, click
name you want to assign. Click

Installing in Windows 3.1x

1. Make sure Windows Program Manager is running and exit any open application
programs.
2. Insert the printer software CD-ROM.
3. Open the File menu and select
4. Type
D :\EPSETUP
You see the Software Installation screen (shown on page 50).
5. Highlight
Install Printer Driver
6. Click to install the software.
OK
Your printer is automatically set to your local port, LPT1. You need to change it to
follow the network path to your printer. See the section below.
, and click
Settings
.
Ports
, then type the printer's IP address and the
LPR Port
,
OK Close
.
Run
(where is the drive letter of your CD-ROM) and click
D :
and click the right arrow button
.
Printers
printer icon.
tab.
Details
tab.
and choose the server or
Browse
, and again.
OK
.
OK
.
OK
.
51