Epson Stylus Color 900N User Manual page 116

3. Type
A:\SETUP
4. Close any open programs and click
to install Status Monitor 2.
5. Click to accept the default directory or choose a different directory and click
Next
.
Next
6. If you are using Windows 98 or Windows 95 and you have TCP/IP installed, you
see a screen asking you if you want to enable EPSON TCP/IP printing.
Select if you want to print with TCP/IP, and then click
Yes
TCP/IP Printing:
7. Select the type of printer(s) you want to monitor and click
Monitor:
EPSON TCP/IP printers_______ Windows shared printers_______
NetWare printers_______ local printers_______
8. Select to monitor EPSON network printers that do not have drivers
Monitor
installed in your computer. Select
Then click
Next
Printers: Monitor_______ Do not monitor_______
9. If you're using NetWare, set the number of hops (0 to 15) and click
Number of hops:_______
If you have dial-up routers in a NetWare environment, they
may automatically dial up the next hop and you may be
charged for the line connection depending on the number of
hops you set. To prevent this and to keep network traffic to a
minimum, set hops carefully.
10. Check the current settings and click
installer prompts you, insert the second diskette.
11. When you see the Setup Complete screen, select
12. Insert the Status Monitor 2 for EPSON Stylus COLOR 900N, diskette 1, in your
drive.
and click .
OK
Next
Yes_______ No_______
Do not monitor
.
. A screen appears asking where you want
if network traffic is a problem.
to install the software. When the
Next
and click
No
.
Next
.
Next
.
Next
.
Finish
109