Selecting A Font From A Cartridge With Your Application Program; Recovering From A Cartridge Error - Epson 60 Operator's Manual

APPENDIX D. OPTIONAL FONT CARDS AND CARTRIDGES
Maker
Everex Systems, Inc.
IQ Engineering
Pacific Data Products, Inc.
UDP Data Products, Inc.
Intercon Associates, Inc.
To install or remove a font cartridge, see page 12.

Selecting a font from a cartridge with your application program

When the printer is in HP emulation mode, you can use your application software to se -
lect fonts from the cartridge. First, be sure that you have selected HP LaserJet III or a
similar printer from the program's installation or printer selection menu. For a list of the
printer types that you can specify with your software, see page 16. After you set up
your application software, you can specify the fonts you need to use from within the
program.
If your program does not provide commands that allow you to select the font you need,
you can use the FONT feature (see pages B- 5 and C-2) or you can use printer com -
mand sequences (see pages B- 21 and C-8).

Recovering from a cartridge error

When the display shows one of the following error messages, a cartridge error has oc -
curred: REINSERT CARD, ILLEGAL CARD #x, REMOVE CARD
See the Error Message section starting on page 44 for how to deal with these errors.
D-6
Cartridge Number Cartridge
HardFont B Cartridge
HardFont F Cartridge
HardFont T Cartridge
HardFont Z Cartridge
HardFont LGL Cartridge
HardFont SST Cartridge SST
HardFont BST Cartridge
HardFont All-in-1 Cartridge
HardFont A-TO-Z Cartridge
Super Cartridge 1
Super Cartridge 2
Super Cartridge 2L
Super Cartridge LC
Super Cartridge 2WP
25 in One! Original Version
25 in One! 172
Headlines in a Cartridge
DP1-TmsRmn
DP2-Helv
65-in-One!
PHont+
ProllP