Basic Operations; Turning The Printer On Line And Off Line; Form Feed - Epson 60 Operator's Manual

BASIC OPERATIONS

TURNING THE PRINTER ON LINE AND OFF LINE

The printer must be on line before it can receive data from the computer. When the
printer is off line, it will not accept data from the computer.
To switch between on line and off line:
1. Make sure that the machine is in printer
READY: mode.
Note: If the machine is in fax standby
mode, press
2. Press the key.
The indicator is lit when the printer is on line, indicating that the printer is ready to
receive data. If the printer is off line, the indicator is out. The indicator flashes while t he
printer is switching between on and off line status.

FORM FEED

If the indicator is lit and the printer is not printing, data has been received and stored
in the printer's buffer, but it has not yet been printed.
To print the data:
1. Make sure that the machine is in printer
READY: mode.
Note: If the machine is in fax standby
mode, press
2. Switch the printer off line (press
If the printer is in Individual Multi-user mode: You can specify which channel to
print from. The display will be as follows if you do a form feed.
To print data from the parallel channel, press
To print data from the serial channel, press
If you do not wish to print data, press
See page 13 for details on your printer's multi-user modes.
14
Function 3 5 Yes
Function 3 5 Yes
), then press
to exit from this procedure.
.
.
to print.
.
.