Sub Config - Epson 60 Operator's Manual

SUB CONFIG.

The SUB CONFIG. is a menu within Selectype Level 1. It contains these features.
PITCH: Use this to select a character pitch of 10, 12, or 15 characters per inch (cpi),
or proportional spacing (PROP). A setting of 10 provides more space between char -
acters, and 15 provides less.
CONDENSED: Use this to change the character spacing. Condensed printing is use -
ful for spreadsheets and other applications where you need to fit a lot of information
on each line. Fonts with a pitch of 15 cpi cannot be condensed.
L-MARGIN: Use this to set the left margin. Margin units are determined by the cur -
rent pitch (cpi) and the condensed setting (on or off). The factory setting is 0.
If you select proportional, 10 cpi and condensed determine the margin units. If you
change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is
set to A4 [8.3" x 11.7"]), the left margin defaults to 0.
R-MARGIN: Use this to set the right margin. Margin units are determined by the cur -
rent pitch (cpi) and the condensed setting (on or off). The factory setting is 80.
If you select proportional, 10 cpi and condensed determine the margin units. If you
change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is
set to A4 [8.3" x 11.7"]), the right margin defaults to the following setting.
Paper Size Condensed
A4 OFF
ON
A4-80 col OFF
ON
Letter OFF
ON
Legal OFF
ON
APPENDIX C. EPSON LQ AND FX EMULATION MODES
Portrait
10 cpi 12 cpi
77 93
133 155
80 96
137 160
80 96
137 160
80 96
137 160
15 cpi 10 cpi
111
116
191
111
120
191
105
120
180
135
120
231
Landscape
12 cpi 15 cpi
134
223
167
134
223
126
157
210
162
202
270
C-3