Creating Print Modes Often Used With The Rip; For Onyx Rip - Epson ONYX RIP Manual

Epson Manual for RIP Printing (ONYX RIP)

Creating Print Modes Often Used with the RIP

For ONYX RIP

There is some software bundled with ONYX RIP (such as RIP Queue, Media Manager, and Job Editor — the contents
differ depending on the RIP you are using). From now, we will explain how to setup RIP Queue, which can do print job
management and print mode settings, below.
In RIP Queue, you can save print modes that you often use as a preset called quick set.
By creating a quick set, you do not need to do bothersome printer settings every time. You can print using the same
print mode simply by reading the print data and selecting the quick set.
"Creating Quick Sets" on page 21
U
A hot folder with the same name is also automatically made when you create a quick set. If you do the following
preparations, you can easily print just by dragging and dropping the print data to the shortcut icon for the hot folder.
"Preparations for Hot Folder Printing" on page 25
U
Creating Quick Sets
A
Right click the RIP Queue icon and select Run as administrator.
Always start the software in administrator mode when you update or create new quick sets.
B
Click Configure Printer in the toolbar.
Preparations for Printing
21