Cut-Sheet Feeders; Installing A Cut-Sheet Feeder; Installing Acut-Sheet Feeder - Epson 5000+ User Manual

Cut-Sheet Feeders

Two cut-sheet feeders are available for use with your printer
C80637* (Single-bin)
C80638* (High-capacity)
* This is a substitute for the last digit, which varies by country.
The single-bin cut-sheet feeder holds up to 50 single sheets of
paper and the high-capacity cut-sheet feeder holds up to
sheets of paper or up to 30 air mail or 25 plain bond envelopes.
By connecting both cut-sheet feeders, you can operate them as
a double-bin cut-sheet feeder (see Assembling the double-bin
cut-sheet feeder). This allows you to load two different types of
paper automatically.
Before you install your cut-sheet feeder, assemble it by
following the instructions in the manual that comes with it.

Installing a cut-sheet feeder

You follow the same steps to install either the single-bin or
high-capacity cut-sheet feeder:
1. Make sure the printer is turned off. Remove the paper guide
and the printer cover.
2. If the standard tractor is installed in the pull-tractor position,
remove it and re-install in the push-tractor position. If the
optional pull tractor is installed, remove it. In either case,
make sure the paper-tension unit is installed.
4-2 Using Printer Options
150