Epson 5000+ User Manual page 100

3. Pull the paper-set levers on each side of the cut-sheet feeder
all the way forward until the paper guides retract and lock
open to allow for paper loading.
4. Take a stack of paper and fan it. Next, tap the side and
bottom of the paper on a flat surface to even up the stack.
Insert up to
5.
plain bond envelopes.
Adjust the position of the right paper guide so that it matches
6.
your paper's width. Make sure that the position of the
guide allows the paper to move freely up and down. Then
lock the right paper guide in place by pushing back on the
lock lever.
4-8 Using Printer Options
Caution:
Do not use multi-part forms, carbon paper, or labels in the
cut-sheet feeder.
sheets of paper or up to 30 air-mail or 25
150