Using The Optional Cut-Sheet Feeders; Installing The High-Capacity Or Double-Bin Cut-Sheet; Feeder - Epson LQ-2080 User Manual

Using the Optional Cut-Sheet Feeders

When you install the optional high-capacity cut-sheet feeder (C80673 ), you
can load up to 150 single sheets of paper in the printer. You can also create
a double-bin cut-sheet feeder by connecting the second bin cut-sheet feeder
(C80674 ) to the high-capacity cut-sheet feeder. The double-bin cut-sheet
feeder allows you to load two different types of single-sheet paper in the
printer at the same time and easily switch between them. To assemble the
double-bin cut-sheet feeder and load paper in the second-bin cut-sheet
feeder, see the second-bin cut-sheet feeder manual. For instructions on
selecting bin 1 or bin 2 of the double-bin cut-sheet feeder, see page A-10.
Note:
The second-bin cut-sheet feeder can be used only in combination with the high-
capacity cut-sheet feeder; you cannot use it alone.

Installing the high-capacity or double-bin cut-sheet

feeder

You install the high-capacity cut-sheet feeder and double-bin cut-sheet
feeder in the same way. Follow the steps below.
Note:
Before installing the double-bin cut-sheet feeder, assemble it as described in the
cut-sheet feeder manual.
Warning:
w
You will need to move the print head by hand before installing the cut-sheet
feeder. If you have just used the printer, the print head may be hot; let it cool
for a few minutes before touching it.
1. Make sure the printer is turned off.
Caution:
c
Be sure to turn off the printer. You will need to move the print head to
the ribbon installation position before installing the high-capacity or
double-bin cut-sheet feeder, and moving the print head while the
printer is on may damage the printer.
2. Remove the paper guide and printer cover. Slide the print head to the
ribbon installation position (the indented portion of the paper tension
unit) by hand.
A-4
Enhancing Your Printer With Options