Removing Continuous Paper From The Pull Tractor - Epson 5000+ User Manual

24-pin dot matrix printer
Hide thumbs Also See for 5000+:
Table of Contents

Advertisement

16. If necessary, adjust the paper position using the micro-feed
feature described in Chapter 3.
Caution:
Use the knob on the right side of the printer only to clear paper
jams when the printer is of. Otherwise, you may damage the
printer or cause if to lose the top-of-form position.
17. To replace the printer cover, insert the front tabs into the
slots on the printer and then lower the cover into place.
Raise the paper-guide cover and rest it on the paper guide.

Removing continuous paper from the pull tractor

1. To remove continuous paper when using the pull tractor, tear
off the paper at a point before it enters the paper slot.
2. Press the LF/FF button to feed the remaining paper forward,
out of the printer.
2-20 Paper Handling

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionprinter 5000+

Table of Contents