Other Control-Panel Features - Epson 5000+ User Manual

MICRO FEED
MICRO FEED
See "Micro-Feed" later in this chapter for more information on
using the button.
Bin Select/TEAR OFF
This button selects the paper bin when both optional cut-sheet
feeders are installed and you are printing on single sheets.
When printing on continuous paper, press this button once to
feed paper from the loading position to the tear-off position.
Press this button again to feed the paper backward to the
loading position.
CONDENSED
Press this button to print condensed characters. Press it again
to return to normal character printing.
FONT
Press this button to select from among the built-in fonts.
You cannot select Roman T or Sans Serif H with this button.
You can select these fonts only with your software.
Note:
The typestyle samples on the panel are meant as guides only; actual
printed results may differ slightly.

Other control-panel features

The control panel also gives you access to the two other special
functions.
(LOAD/EJECT)
(LF/FF)
Feeds paper forward in
1/180-inch increments.
Reverse-feeds paper in 1/180-inch
increments.
Using the Printer 3-5