Initialization - Epson 5000+ User Manual

24-pin dot matrix printer
Hide thumbs Also See for 5000+:
Table of Contents

Advertisement

Paper storage conditions
Temperature:
Humidity
Environmental
Temperature:
Operation:
Storage:
Humidity (without condensation):
Operation:
Storage:
Note:

Initialization

The printer can be initialized (returned to a fixed set of
conditions) in three ways:
Hardware initialization
Saftware initialization
Control panel

initialization

7-16 Technical Specifications
2
90-g/m
(24-lb) paper printing is available only under
normal environmental conditions.
Envelope printing is available only with the C80638*
cut-sheet feeders, under normal environmental conditions.
same time (buffer clear).
18° to 22°C (64° to 72°F)
40% to 60%
5° to 35°C (41° to 95°F)
-30° to 60°C (-22° to 140°F)
15% to 80% RH
5% to 90% RH
The power is turned on,
The printer receives an INIT signal from the
parallel interface (pin 31 goes LOW),
Software sends the ESC @ command,
You press the PAUSE and ALT buttons at the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionprinter 5000+

Table of Contents