Epson 5000+ User Manual page 81

24-pin dot matrix printer
Hide thumbs Also See for 5000+:
Table of Contents

Advertisement

3. While holding down the
button to adjust the loading position to a lower position on
the page; press the
position to a higher position on the page. The
light stops blinking after a short time.
Note:
For continuous paper, the printer remembers this new position
even after it has been turned off and back on.
The printer has a minimum and maximum loading position. If
you try to advance the loading position beyond these limits, the
printer beeps and the paper stops moving.
When the paper reaches the factory-set loading position, the
printer beeps and paper feeding pauses briefly. Use the factory
set ting as a reference point when adjusting the loading position.
The printer remembers the new loading position for single- sheet
paper only until you turn off the power. The loading position
returns to the factory setting when the power is turned on again.
3-16 Using the Printer
button, press the
ALT
button to adjust the loading
LF/FF
LOAD/EJECT
MULTI-PART

Advertisement

Table of Contents
loading

This manual is also suitable for:

Actionprinter 5000+

Table of Contents