Using The Tear Off - Epson 5000/5500 User Manual

Enter tear-off mode by performing the following steps:
1. Make sure the printer is turned off.
2. Turn DIP switch 2-3 on.
3. Turn the printer on.
When tear-off mode is on and you print on continuous paper on the
push tractor, the printer advances the final printed page to the tear-
off position. Then you can tear off all printed pages.
If the perforation is not aligned with the tear-off edge, adjust the
tear-off position as described in the section on adjusting the tear-off
position later in this chapter.
When you resume printing, the printer automatically feeds
back to the loading position and begins printing. (You can also
manually feed the paper back to the loading position by pressing
LOAD/EJECT
the
Using the
TEAR OFF
Whether or not the printer is in tear-off mode, you can use the
TEAR OFF
button to advance continuous paper to the tear-off
position by following the steps below.
1. Make sure printing has finished. Then press the
button. The printer advances the paper to the tear-off edge and
TEAR OFF
the
Tear off all printed pages. If the perforation is not aligned with
2.
the tear-off edge, adjust the tear-off position as described in the
next section.
When you resume printing, the printer automatically feeds the
3.
paper back to the loading position and begins printing. (You can
also manually feed the paper back to the loading position by
pressing the
TEAR OFF
or button.)
button
light comes on.
LOAD/EJECT
or
TEAR OFF
button.)
Using the Printer
Tear Off
the
paper
TEAR OFF
3-17