BACKUP TIME= xx min Shows Estimated Backup Time in Minutes
BAT CHARG= xx%
TEMPERATURE= xxC
BAT PACK NUM= x
RATING = xxxxVA
CPU VERSION xx.x
6.6
UPS Configurations
1) Parameter settings may be viewed from the UPS Settings display.
2) To enter the configuration mode, press and hold the Function button for one second.
The first configuration parameter will be shown on the LCD display.
3) Press the Function button again to scroll through the remaining parameters.
4) Press the Enter button to select a displayed parameter.
5) Press the Function button to scroll through the options for the selected parameter.
Press the Enter button to select the setting.
6) If prompted to save the selection, press the Enter button to either confirm or save
the selection. See the table on page 12 for a complete listing of the user-settable
parameters.
7) If there is no user input for ten seconds, the UPS will exit the configuration mode
and return to normal mode displaying Line mode.
Shows Approximate Percentage of Battery Capacity
Shows Approximate Ambient Temperature
Shows External Battery Pack Number
Shows UPS Rating
Shows CPU Version
20