Outline Of Preparation Procedure Before Operating The Ecr - TEC MA-516-100 SERIES Owner's Manual

5. Outline of Preparation Procedure Before
Operating the ECR
This chapter shows the outline of set-up procedure of the ECR before actually starting the ECR operation.
1
Remove the cash register from the carton, referring to Chapter "2.
Unpacking" on page 2. And take out all the parts and accessories.
2
Remove the tapes and seals for holding parts or protecting the
register surfaces.
3
Plug the power cord of the register into a wall outlet. Make sure that
the outlet voltage matches that of the power required for the
register.
4
Insert the MA key into the Control Lock.
5
Turn the Control Lock to the REG position.
- 9 -
EO1-11116
MA-516-100 SERIES
(1) (2) (3) (4) (5) (6) (7) (8) (9)
MGR
X
REG
-
OFF
SET
MGR
X
REG
-
OFF
SET
Z
Z