Cashier Push Key Method - TEC MA-516-100 SERIES Owner's Manual

2. If the [LOG/RECEIPT] key is simply depressed without a prior numeric entry or with only any
Declaration Key (such as [RTN MDSE]), the Receipt ON/OFF function is activated (refer to
"Receipt-issue/Non-issue Selection" in the next Chapter) but not Sign ON/OFF.
3. If the Cashier Identitying Function "NOTHING" (SET status) is selected (refer to Chapter "22.
System Option Setting," Address 2 - Bit 8 on page 120), an error will result on a Sign On
or Sign OFF attempt.
Sign ON Receipt Format

(2) Cashier Push Key Method

This method is applied when four push stay-down keys are installed as cashier keys.
1 2 3 4
NOTES 1. When this method is adopted, the signing function ("LOG" function) of the [LOG/RECEIPT] key
is deactivated. Accordingly, the key is only used as Receipt ON/OFF switch.
2. No receipts are issued on turning ON or OFF a Cashier Key. However, the Cashier Code (1 to
4) is printed near the bottom of every receipt to be issued.
Sign OFF Receipt Format
Cashier Code (1 to 8)
The signed-ON Cash-
ier Code is printed on
every sale receipt.
(The Secret Code
portion is never
printed.)
Each key (1 to 4) is assigned to each cashier. The register will not
operate in the REG, MGR, or - mode unless of these keys is pushed
held down.
- 37 -
EO1-11116
MA-516-100 SERIES
Sign OFF Code
(always 0)