Replacing The Journal Roll - TEC MA-516-100 SERIES Owner's Manual

Replacing the Journal Roll

X
REG
OFF
SET
5
Load new paper roll as described in Chapter 10 on page
16.
1
Turn the Control Lock to the REG position using the
Control Key.
Z
2
To remove the Printer Cover, insert the Printer Cover
Key to the Printer Cover Lock, and then turn it 90
clockwise.
3
Depress the [JF] key to wind up enough of the Journal
Paper, then cut the paper as shown in the figure.
Depress the [JF] key to feed the remaining paper end.
TX
M
CAUTION: Never try to pull out the remaining paper end
- 142 -
MA-516-100 SERIES
by hand. It may cause a paper jam.
EO1-11116