Standalone And To-Be-Racked Systems; Rack-Mount System Installation - HP Integrity rx7640 Installation Manual

Hp integrity rx7640 and hp 9000 rp7440 servers installation guide

Hide thumbs Also See for Integrity rx7640:

Table of Contents

Installing the Server

Standalone and To-Be-Racked Systems

Servers shipped in a stand-alone or to-be-racked configuration must have the core I/O handles and the PCI

towel bars attached at system installation. Obtain and install the core I/O handles and PCI towel bars from

the accessory kit A6093-04046. The towel bars and handles are the same part. Refer to service note

A6093A-11.

Information is available to help with rack-mounting the server. This list is intended to guide the HP

Installation Specialist to the documentation that has been written by the Rack and Power team. The server

can be installed in both the 10000 Series Rack and the Rack System/E.

The external Web site is:

http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html

The internal Web site for10K Racks is:

http://isspit.corp.hp.com/application/view/ProdCenter.asp?OID=254479

The interal Web site for the System/E Racks is:

http://isspit.corp.hp.com/application/view/ProdCenter.asp?OID=1130382

Chapter 2

Table of Contents

Show Quick Links

Table of Contents

9000 rp7440