Overview - HP rp8400 Series Installation Manual

Overview

The hp rp8400 server series has an AC power plug on a 3-wire AC power cable. These systems connect to a
power source of 200-240 V AC.
WARNING Do not set site AC circuit breakers serving the cabinet(s) to
the cabinet has been wired into the site AC power supply correctly. Failure to do so
may result in injury to personnel or damage to equipment when AC power is applied
to the cabinet.
Always perform a wiring check to verify that the AC power cable is wired into the AC power supply correctly
before applying AC power to the cabinet(s).
Verify the following items before applying AC power to the cabinet.
• Cabinet ground connects to the site electrical system ground and is not left floating or connected to a
phase.
• AC voltage is within the 200-240 V AC limits.
• Safety warning labels on the cabinet are correct.
Chapter 4
AC Power
Overview
before verifying that
ON
49