Figure 5-3 Lan And Rs-232 Connectors On The Core I/O Board - HP rp8400 Series Installation Manual

System Installation
Setting Up the CE Tool (PC)
1. Connect one end of a null modem cable (9-pin to 9-pin) (Part Number 5182-4794) to the Local RS-232
port on the Core I/O card (the DB9 connector located at the bottom of the Core I/O card).
Figure 5-3 LAN and RS-232 Connectors on the Core I/O Board
2. Connect the other end of the RS-232 cable to the CE Tool.
66
RS-232 UPS Port
SYSTEM LAN Port
RS-232 Remote Port
GSP LAN Port
RS-232 Local Port
Chapter 5