Figure B-1 Remote Connection - HP rp8400 Series Installation Manual
Installation guide, third edition - hp rp8400 server series
Hide thumbs
Also See for rp8400 Series:
- Manual (80 pages) ,
- Administrator's manual (266 pages) ,
- Programmer's manual (109 pages)
Table of Contents
Advertisement
Accessing the MP Using a Modem
To connect the serial display device to the MP using a modem:
1. At the side of the SPU cabinet, connect one end of a modem cable to the Remote RS-232 port on the Core
I/O card.
Figure B-1
Remote Connection
2. Connect the other end of the RS-232 cable to the modem.
3. Connect a dedicated phone (analog) line to the modem.
4. Set modem configuration as specified for remote support.
90
Appendix B
Advertisement
Table of Contents
