Test-Um Validator-NT NT955 Operating Instructions Manual page 83

Test-Um NT955 Series
The Ping Tool soft key (F3) only shows on the IP address screen once
valid DHCP information or manual IP addresses are configured. All
the IP addresses that are currently setup to be pinged are displayed on
entry. Uncheck the box next to any addresses you do not want to ping.
The Host/IP address can be edited directly on this screen (the default
URL is www.test.um.com) and the Targets soft key (F4) and subsequent
screen is used to edit the four other user defined targets. Press the
Ping soft key to start the ping operation of up to seven IP addresses
simultaneously. Press quit to stop.
Ping Tool
Untitled1.job
PING
BACKSPC
Figure 6.11 IP Addresses Setup to be Pinged
100%
Target
HOST/IP www.Test-Um.com
GW/RTR 192.168.1.1
DNS 192.168.1.100
HOST/IP www.yahoo.com
DELETE
Validator
2005 Aug 25 Test-Um Inc.
10:53:01
validator
Size Received/Sent
Long
Long
Long
Long
PING TARGETS
82
TM Network Tests
ms