Table of Contents
Advertisement
Test-Um NT955 Series
6. Performing Active Network Tests
Active Network Tests include four functional test areas designed to report
cable performance and verify connectivity to network devices: Port
Discovery, Ping, Cisco Discovery Protocol, and Hub Flash. Select
Network Tests from the Start menu to access Network Tests. Use the
RJ45 ports to perform these tests.
Warning! Active Network Test Results will NOT be Saved.
Figure 6.1 Port Discovery Network Test Flowchart
Start
2005 Aug 25
100%
Untitled1.job
Manual
Auto
Tests
Test
Job
Setup
Manager
Network Tests
2005 Aug 25
100%
Untitled1.job
Port
Discovery
Cisco
Discovery
Protocol
Port Discovery
2005 Aug 25
100%
Untitled1.job
E-NET
Ethernet
E-NET
Capabilities
AUTO
Link established at: 1 Gbs
Remote device MDI/MDI-X: Auto
Remote device advertises: 1 Gbs FDX
Remote device advertises: 100 Mbs HDX/FDX
Remote device advertises: 10 Mbs HDX/FDX
Pair [A]:
skew: 0.0 ns
SNR: 30.0 dB
Pair [B]:
skew: 8.0 ns
SNR: 29.9 dB
Pair [C]:
skew: 0.0 ns
SNR: 30.0 dB
Pair [D]:
skew: 8.0 ns
SNR: 30.0 dB
Frequency Offset: 30 ppm
74
Validator
Test-Um Inc.
10:53:01
validator
Network
Tests
Properties
Test-Um Inc.
10:53:01
validator
Ping Test
Hub
Flash
Test-Um Inc.
10:53:01
validator
TM
Network Tests
Hide quick links:
Advertisement
Table of Contents
