Creating Job Information - Test-Um Validator-NT NT955 Operating Instructions Manual

Test-Um NT955 Series

3.2. Creating Job Information

Job Information consists of Contractor Information and Site
Information. Contractor Information identifies contact information for the
company performing the job. Site information contains information about
the site you are designing. (Figure 3.4)
Site and Contractor information prints on all job reports, and is used for
bidding and invoicing.
1. Select Auto Test from the start screen.
2. Select Site Info or
Contractor Info to enter into
the screens.
3. Use the alphanumeric keypad
to enter information into the
fields. Use the Backspace
(F1) and Delete (F2) soft keys
to edit and delete data.
4. Press Quit to exit the screen
when finished.
Site Info Site Info
Untitled1.job Untitled1.job
BACKSPC BACKSPC
100% 100%
Job ID: Job ID: 050825 050825
Company: Company: Residential Site Residential Site
Contact: Contact: John Homemaker John Homemaker
Phone: Phone:
(555) 777-8888 (555) 777-8888
Email: Email:
john@wahoo.org john@wahoo.org
Address 1: Address 1:
8769 Generic Street 8769 Generic Street
Address 2: Address 2:
City: City:
Springfield Springfield
State: State:
MS MS
DELETE DELETE
Figure 3.4 Creating Job Information
Validator Validator
Current Job Current Job
Untitled1.job Untitled1.job
Cable Cable
Test Test
Schedule Schedule
Test-Um Inc. Test-Um Inc.
2005 Aug 25 2005 Aug 25
10:53:01 10:53:01
validator validator
47
TM TM Managing Job Files Managing Job Files
Test-Um Inc. Test-Um Inc.
2005 Aug 25 2005 Aug 25
10:53:01 10:53:01
100% 100% validator validator
Site Info Site Info
Custom Custom
Cable Cable Job Utilities Job Utilities
Definitions Definitions
Contractor Contractor
Info Info