Test-Um Validator-NT NT955 Operating Instructions Manual page 43

Test-Um NT955 Series
6. Select the firmware file from the Firmware Package list. Press
the Install soft key (F1) to install the firmware. (Figure 2.7)
7. The Firmware Revisions screen will show the new revision in
the Now column. It also shows the minimum revision level
necessary for compatibility with the new component.
8. A Green check in the component column indicates the existing
component is compatible with the new. A Red check signifies
it is not. If this occurs, call Test-Um support. Do not attempt to
operate the Validator-NT with incompatible files.
9. If all components have a Green check press Continue (F1) to
begin the update process. Do not interrupt the update process
that can take several minutes.
10. The Validator-NT automatically reboots when the update is
complete.
11. From the Properties screen, select Product version to verify all
updates installed correctly.
Manage Firmware
100%
Untitled1.job
Firmware Package

VAL-full-02.03.TUI
INSTALL
Figure 2.7 Firmware Manager
2005 Aug 25 Test-Um Inc.
10:53:01
validator
42
Validator Validator TM TM Properties Properties