Using Template Files - Test-Um Validator-NT NT955 Operating Instructions Manual

Test-Um NT955 Series

3.4. Using Template Files

Each time you create a New Job, select a previously created template
with Contractor Information and/or Custom Cable Definitions to avoid
reentering information. (Figure 3.6)
1. From the Start screen, select Auto Test.
2. Using the arrow key, navigate to Job Utilities and press
Select.
3. On the Job utilities screen, select New.
4. Enter a name for your job in the Filename box using the
alphanumeric keypad. Press Accept. You must create a
Filename. If you do not create a new Filename a Warning
Message appears advising that the "Filename is empty."
Press OK to go back and create a Filename for the job.
5. Press Select to display the existing template files.
6. Select a template that has been previously created or select
Default for a blank template.
7. Press OK (F3) when finished. Your new job that has been
created will be your current job.
New File
Untitled1.job
BACKSPC
100%
Filename:
Template File:
DELETE
Figure 3.6 Selecting a Template File
Validator Validator
Test-Um Inc.
2005 Aug 25
10:53:01
validator
Example
Default.tut
Default.tut
Template01.tut
Template02.tut
OK
49
TM TM Managing Job Files Managing Job Files