Autolap And Speed Limits - Suunto t3d User Manual

TIP: If you have paired a Cadence POD, you can switch between speed and cadence as
the main view in
SPEED AND DISTANCE

5.2 Autolap and speed limits

With the autolap feature, you can define laps in distance instead of time (interval
training). When autolap is turned on (and your speed and distance POD is activated),
your Suunto heart rate monitor shows total distance, average lap speed, and lap time
for each lap.
NOTE: When using the autolap feature, it is very important to calibrate your speed and
distance POD accurately.
Setting Value
autolap on / off
dist. 0000
To change autolap settings:
1. In
SPEED AND DISTANCE
you reach
AUTOLAP
2. Enter the setting with [Mode] and set the value using [Lap +] and [Light -].
mode by keeping [View Back]pressed.
Description
Autolap feature: on or off
Distance: lap distance according to
selected units in GENERAL settings
mode, enter the menu (
.
) and scroll with [Lap +] until
SET
en
31