Limits Of Liability And Iso 9001 Compliance - Suunto t6 Quick Manual

12.3. CE
The CE mark is used to mark conformity with the European Union EMC directives 89/
336/EEC and 99/5/EEC.

12.4. Limits of liability and ISO 9001 compliance

If this product should fail due to defects in materials or workmanship, Suunto Oy
will, at its sole option, repair or replace it with new or rebuilt parts, free of charge,
for two (2) years from the date of its purchase. This warranty is only extended to
the original purchaser and only covers failures due to defects in materials and
workmanship that occur during normal use while in the period of the warranty.
It does not cover battery, battery replacement, damage or failures resulting from
accident, misuse, neglect, mishandling, alteration or modifications of the product,
or any failure caused by operation of the product outside the scope of its published
specifications, or any causes not covered by this warranty.
There are no express warranties except as listed above.
The client can exercise the right to repair under the warranty by contacting Suunto
Oy's Customer Service department to obtain a repair authorization. Suunto Oy and
its subsidiaries shall in no event be liable for any incidental or consequential damages
arising from the use of or inability to use the product. Suunto Oy and its subsidiaries
do not assume any responsibility for losses or claims by third parties that may arise
through the use of this device.
Suunto's Quality Assurance System is certified by Det Norske Veritas to be ISO
9001compliant in all Suunto Oy's operations (Quality Certificate No. 96-HEL-AQ-220).
28