Using Training Mode; Putting On Your Transmitter Belt - Suunto t3d User Manual

4 USING TRAINING MODE

en
The mode handles measurement of all your training activity.
TRAINING
NOTE: Even though both Suunto t3d and the transmitter belt are water-resistant, the
radio signal does not carry in water, which makes the communication between Suunto t3d
and the transmitter belt impossible.

4.1 Putting on your transmitter belt

Put on the belt as illustrated and switch to mode to start monitoring your
TRAINING
heart rate. Moisten both contact areas (1) with water or gel before putting the belt on.
Ensure the belt is centered on your chest.
17