Selecting a Test
From the DEVICE LIST, select the device to be tested. Type the
number of the device, then press
appears:
Number of times to test device
1 - Run test one time
2 - Run test multiple times
0 - Exit
Enter selection number:
You can specify that the test be performed one time only or any
number of times up to 9999. Running a test multiple times is for
reliability testing of essential functions only; in most cases running
a test only once is sufficient.
To perform the test only once, press 1 and
the device you have selected, the program may then display a
submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and
prompt:
Terminate checking if an error is
detected (Y/N)?
Enter
Press Y and
N
error, or press
errors occur. This prompt then appears:
How many times (1-9999)?
Type the number of times you want to repeat the test; then press
Enter.
The tests for the device now start.
Performing System Diagnostics
D-4
to terminate checking if the device produces an
Enter
and
to repeat the tests regardless of whether
Enter.
The following menu
Enter.
Enter. You
Depending on
see this