Table of Contents
Advertisement
When you are finished, press 0 and
LIST for a final check. If the list is correct, press Y and
ready to select a test.
Selecting a Test
From the DEVICE
the device, and then press
Number of times to test device
Run test one time
2
Enter selection number:
You can specify that the test be performed one time only or any number of
times up to 9999. Running a test multiple times is for reliability testing of
essential functions only; in most cases running a test only once is sufficient.
To perform the test only once, press
you have selected, the program may then display a submenu of more
detailed tests you can select.
To perform the test multiple times, press 2 and
Terminate checking if an error is detected (Y/N)?
Press Y and
Enter
press
and
N
Enter
then appears:
How many times (1-9999)?
Type the number of times you want to repeat the test; then press
The tests for the device now start.
Performing System Diagnostics
LIST,
select the device to be tested. Type the number of
Enter.
to terminate checking if the device produces an error, or
to repeat the tests regardless of an error. This prompt
to display the modified DEVICE
Enter
The following menu appears:
then
1
Enter.
Enter.
are now
Enter. You
Depending on the device
You see this prompt:
Enter.
D-3
Advertisement
Table of Contents
