Using The Epson Help Utility - Epson Equity LT-286 User Manual

Using the Epson HELP Utility

The Epson HELP utility provides on-line information on MS-DOS
commands and programs. You can use HELP in either of two ways:
You can type HELP at the command prompt and press
l
display the HELP menu
You can bypass the menu by typing HELP plus the name of the
l
command you want information about.
The HELP utility requires the two files HELP.COM and
HELP.TXT. These files are located on the Operating 2 diskette.
To run HELP from the hard disk, you must be logged onto the
directory that contains these two files. If you copy HELP.COM
to another directory on your hard disk or diskette, you must also
copy HELP.TXT to the same directory.
To HELP
use the
1. Type HELP at the MS-DOS command prompt and press
2. The screen displays a menu of MS-DOS commands. Use the
cursor keys to highlight the command you want information
about, then press
3. If there is more than one page of information about the
command you selected, you see the prompt PgUp at the top of
the screen. Press the
4. To return to the HELP menu, press
exit the HELP utility. The last command selected in HELP is
displayed at the command prompt for easy reference.
5-22
Using MS-DOS With Your Equity LT-286
menu, follow these steps:
Enter.
PgUp
key to display the rest of the text.
Press
E . E
SC SC
Enter
to
Enter.
again to