Attribute Check; Character Set Check - Epson Equity LT-286 User Manual

Attribute Check

To check the video display attributes, press 2 and then
Several messages are displayed showing examples of all the possible
display attributes and colors. (On the LCD, the colors appear as
gray tones.) Check the information on your screen and respond
the prompt:
Is the display correct (Y/N)?
Enter
Press Y and
If the colors or gray tones are not correct, adjust the controls on
your LCD screen or monitor. If they are still incorrect, or if any of
the other attributes are not correct, press
Note
On the LCD display, this test is run with gray scale mode 2 in
effect, regardless of how t he DIP switches are currently set. Table
1-2, in Chapter 1, lists the mapping of colors to gray tones in
mode 2.
Contact your Epson dealer to verify any display problems.

Character Set Check

To check your 80-column character set, press 3 and then
The character fonts that are included in the internal character
generator are displayed. Check your screen display against the
following illustration:
D-12 Performing System Diagnostics
if the display is correct.
Enter.
N Enter.
and
to
Enter.