Selecting A Test - Epson EQUITY Y14499113001 User Manual

Type the number of the item you wish to add and press
disappears from the Additional DEVICE LIST on the screen.
You can add as many devices as necessary. When you finish adding
devices, press
0 and Enter
Note: Even if you have both monochrome and color monitor video cards
installed, you can only test the monitor that is currently selected by
DIP switches 1-5 and 1-6 on the front panel.
To remove a device from the list, press
the current DEVICE LIST and the prompt:
Enter the number of the item to delete:
Type the number of the item you wish to delete and press
disappears from the DEVICE LIST on the screen. You can delete as many
devices as necessary. When you finish deleting items, press
return to the Modify DEVICE LIST menu.
When you finish modifying the DEVICE LIST, press 0 and then
The screen displays the modified DEVICE LIST for a final check. If the list is
correct, press
Y
You are now ready to select a test.

Selecting a test

From the DEVICE LIST, select the device to be tested. Type the num-
ber of the device, then press
Before the test begins, you are asked how many times to perform the
test. You see this menu:
Number of times to test device
2 - Run test multi- ale times
Enter selection number:
5-4
to return to the Modify DEVICE LIST menu.
and
Enter.
Enter.
Enter. That
2 and Enter.
item
The screen displays
That item
Enter.
and
0 Enter
Enter.
.
to